Local Commands host advanced properties

Add Mailbox Alias Directory to Inbox
Appends a subdirectory at the end of the host's configured inbox directory.  This allows files received through different  mailboxes to be kept separate.
Possible values: On or Off
Default value: Off
Add Mailbox Alias Directory to Outbox
Appends a subdirectory at the end of the host's configured outbox directory.  This allows files to be sent through different mailboxes to be kept separate.
Possible values: On or Off
Default value: Off
Allow Actions To Run Concurrently
Normally, actions and host actions within the same host are allowed to run concurrently. You can use this property to not allow actions and host actions to run concurrently.
Note: This is a Cleo Harmony and Cleo VLTrader option.
Possible values: On or Off
Default value: On
Command Retries
If an error or exception occurs during a command, the number of times the command should be retried.
Note: Command Retries does not apply to exceptions related to TCP/IP or ISDN dial-up connections. This is because dial-up connections are managed by the framework so that they can be shared across actions.
Possible values: 0 - n
Default value: 0
Email On Check Conditions Met
Send an email notification after running a CHECK command where the overall conditions of the check are met.  See Configuring email or execute based on results.
Note: This is a Cleo Harmony and Cleo VLTrader option.
Possible values: Email addresses separated by commas (,), semicolons (;), or colons ( : ).  The first address should be an internal email address.
Default value:The value specified for this property on the Options > Advanced panel (if set).
Email On Check Conditions Not Met
Send an email notification after running a CHECK command where the overall conditions of the check are not met. See Configuring email or execute based on results.
Note: This is a Cleo Harmony and Cleo VLTrader option.
Possible values: Email addresses separated by commas (,), semicolons (;), or colons ( : ).  The first address should be an internal email address.
Default value:The value specified for this property on the Options > Advanced panel (if set).
Email On Fail
If an error occurs during a command, email the error condition.  See Email/Execute Based on Results.
Possible values: Email addresses separated by commas (,), semicolons (;), or colons ( : ).  The first address should be an internal email address.
Default value:The value specified for this property on the Options > Advanced panel (if set).
Email On Flag
If a flagged event occurs, email the event. See Configuring email or execute based on results.
Email addresses separated by commas (,), semicolons (;) or colons (:). The first address should be an internal email address.
Possible values: Email addresses separated by commas (,), semicolons (;), or colons ( : ).  The first address should be an internal email address.
Default value:The value specified for this property on the Options > Advanced panel (if set).
Email On Repetitive Action Failures
When "Email On Fail" is enabled and the same failure occurs each time an action is run for a specific host, leaving this option unchecked suppresses emailing of the same alert multiple times.  If the same email alert continues to be suppressed after 24 hours, the suppressed email alert will be sent every 24 hours and after every system restart if the failure occurs again. When the failure is resolved an email alert will be sent.
Note: This feature only suppresses multiple emails if the same failure occurs multiple times in a row. Suppression is not maintained across synchronized hosts.
Possible values: On or Off
Default value: On
Email On Successful Copy
Send an email notification after copying a file using LCOPY.  See Configuring email or execute based on results.
Possible values: Email addresses separated by commas (,), semicolons (;) or colons ( : ).  The first address should be an internal email address.
Default value:The value specified for this property on the Options > Advanced panel (if set).
Execute On Check Conditions Met
After executing a CHECK command where the overall conditions are met, run a system command.  See Configuring email or execute based on results.
Note: This is a Cleo Harmony and Cleo VLTrader option.
Note: Note that if multiple files contribute to the conditions being met, and one of the file macros is in the command (e.g., %file%),  the system command will be executed repeatedly - once for each file.
Possible values: System command to be executed.
Default value: The value specified for this property on the Options > Advanced panel (if set).
Execute On Check Conditions Not Met
After executing a CHECK command where the overall conditions are not met, run a system command.  See Configuring email or execute based on results.
Note: This is a Cleo Harmony and Cleo VLTrader option.
Possible values: System command to be executed.
Default value: The value specified for this property on the Options > Advanced panel (if set).
Execute On Fail
If an error occurs during a command, run a system command.  See Configuring email or execute based on results.
Possible values: System command to be executed.
Default value: The value specified for this property on the Options > Advanced panel (if set).
Execute On Repetitive Action Failures

When Execute On Fail is enabled and the same failure occurs each time an action is run for a specific host, leaving this option unchecked suppresses multiple executions of the Execute On Fail command.  If suppression of execution of the command for this failure continues after 24 hours, the suppressed Execute On Fail command will be executed every 24 hours and after a system restart if the failure occurs again.  When the failure is resolved, the Execute On Fail command will be executed again.  Users must account for this by including the %status% macro variable for the Execute On Fail command (see Using macro variables) and then checking for a success or failure.    

Note: This feature only suppresses multiple executions of the Execute On Fail command if the same failure occurs multiple times in a row.  Suppression is not maintained across synchronized hosts.
Possible values: On or Off
Default value: On
Execute On Successful Copy
After successfully copying  a file using LCOPY, run a system command.  This command may be used for post-processing the file.  See Configuring email or execute based on results.
Possible values: System command to be executed.
Default value: The value specified for this property on the Options > Advanced panel (if set).
Include Failure In Subject Of Email
When specified, the exception message will be included in the email that is generated on failure.
Note: If the exception message exceeds 256 characters, it will be truncated.
Possible values: On or Off
Default value: The value specified for this property on the Options > Advanced panel
LCOPY Archive
If specified, contains the directory for archiving LCOPY source files.
Possible values: Any local or shared directory. Macros can be used.  See Using macro variables (LCOPY Archive context).
Default value: The value specified for this property on the Options > Advanced panel, if any.
Log Individual LCOPY Results To Transfer Logging
When this option is enabled, a <send> and <receive> result is logged to the transfer log for each file copied.
Note: This is a Cleo Harmony and Cleo VLTrader option.
Possible values: On or Off
Default value: Off
Macro Date Format
Specifies the date format to be used when the %date% macro is used.
Possible values: See Using macro variables for information about usage and possible date/time formats.
Default value: The value specified for this property on the Options > Advanced panel, if any.
Macro Time Format
Specifies the time format to be used when the %time% macro is used.
Possible values: See Using macro variables for information about usage and possible date/time formats.
Default value: The value specified for this property on the Options > Advanced panel, if any.
Outbox Sort
Controls the order in which multiple files are transferred for a PUT command.  If System Default is specified, the value set on the Configure > Options > Advanced tab takes precedence.  For Alphabetical ordering, the file extensions are not used to determine the sorted order unless they are needed to make the filenames unique.
Possible values:
  • System Default
  • Alphabetical
  • Date/Time Modified
Default value: System Default
PGP Compression Algorithm
Compression method used when OpenPGP packaging (with compression) is requested through the Mailbox Packaging tab. See Configuring mailbox packaging. If System Default is specified, the value set on the Configure > Options > Advanced tab is in effect.
Possible values:
  • System Default
  • ZIP
  • ZLIB
Default value: System Default
PGP Encryption Algorithm
Encryption method used when OpenPGP packaging (with encryption) is requested through the Mailbox Packaging tab. See Configuring mailbox packaging. If System Default is specified, the value set on the Configure > Options > Advanced tab takes precedence.
Possible values:
  • System Default
  • TripleDES
  • Blowfish
  • CAST5
  • DES
  • AES-128
  • AES-192
  • AES-256
  • Twofish
Default value: System Default
PGP Hash Algorithm
Signing method used when OpenPGP packaging (with signing) is requested through the Configuring mailbox packaging.  If System Default is specified, the value set on the Configure > Options > Advanced tab takes precedence.
Possible values:
  • System Default
  • MD2
  • MD5
  • RIPE-MD-160
  • SHA-1
  • SHA-256
  • SHA-384
  • SHA-512
Default value: System Default
PGP Integrity Check
When OpenPGP encrypting (see Configuring mailbox packaging), include an integrity check on encrypted data. Can be disabled for compatibility with certain OpenPGP implementation.
Possible values: On or Off
Default value: On
PGP Signature Verification
Indicates whether or not signed inbound PGP messages should verified when inbound OpenPGP packaging is requested through the Mailbox Packaging tab. See Configuring mailbox packaging. In general, this property should be enabled.
Possible values: On or Off
Default value: On
PGP V3 Signature
Retry Delay
The amount of time (in seconds) before a retry should be attempted.
Possible values: Any value greater than zero.
Default value: 60 seconds
Terminate On Fail
If an error occurs during a command, stop the action. 
Note:

Regarding non-CHECK commands:  When Terminate On Fail is on, if a command fails, Email On Fail and Execute On Fail, if set, are processed, and then the action stops.  When Terminate On Fail is off, if a command fails, Email On Fail and Execute On Fail, if set, are processed, and the action continues.

Regarding CHECK commands:  Terminate On Fail is only honored if the ConditionsMet parameter is set and the result of the CHECK is classified as Error. The CHECK command is only available in the Cleo Harmony and Cleo VLTrader applications.

Possible values: On or Off
Default value: On
Unzip Use Path
Indicates whether or not zip entry paths should be used for LCOPY -UNZIP operations.  When enabled, the entry's path is added to the destination path, unless the entry contains an absolute path. In this case, the absolute path is used in place of the destination path. 
Possible values: On or Off
Default value: On
Wait For Execute On
Indicates whether execution should wait for processing to complete within an Execute On Fail, Execute On Successful Copy, Execute On Successful Receive, or Execute On Successful Send command.  Note that this option does not apply to native AS400 execution.
Possible values: On or Off
Default value: On
XML Encryption Algorithm
The method used to encrypt/decrypt files when XML Encryption packaging is requested through the Mailbox Packaging tab. See Configuring mailbox packaging .  If System Default is specified, the value set on the Configure > Options > Advanced tab takes precedence. 
Possible values:
  • System Default
  • TripleDES
  • AES-128
  • AES-192
  • AES-256
Default value: System Default
Zip Comment
Specifies the comment to be added to the zip archive file in LCOPY -ZIP operations.
Default value: The value specified for this property on the Options > Advanced panel, if set.
Zip Compression Level
Controls the level of compression for LCOPY -ZIP operations. If System Default is specified, the value set on the Configure > Options > Advanced takes precedence 
Possible values:
  • System Default
  • 9 - (Best Compression)
  • 8
  • 7
  • 6
  • 5
  • 4
  • 3
  • 2
  • 1
  • 0 - (No Compression)
Default value: System Default
Zip Subdirectories Into Individual Zip Files
Indicates whether or not subdirectories should be bundled for LCOPY –ZIP –REC operations.  When enabled, each first-level subdirectory (and all of its descendents) will be bundled together into an individual zip file.  The name of this zip file may optionally reflect the subdirectory name if an asterisk (*) is placed in the destination path.  Any files that are directly off the source root directory will not be copied. 
Possible values: On or Off
Default value: On