HSP Host: Advanced Tab
See Setting advanced host properties for information about how to use and set the properties supported in all protocols. Properties available for HSP include:
- Add Mailbox Alias Directory to Inbox
- Possible values:
OnorOff - Add Mailbox Alias Directory to Outbox
- Appends a subdirectory at the end of the host's configured outbox directory. This allows files to be sent through different mailboxes to be kept separate.
- Add Mailbox Alias Directory to Receivedbox
- Appends a subdirectory at the end of the host's configured receivedbox directory. This allows files that have been sent through different mailboxes to be kept separate.
- Add Mailbox Alias Directory to Sentbox
- Appends a subdirectory at the end of the host's configured sentbox directory. This allows files that have been sent through different mailboxes to be kept separate.
- Allow Actions To Run Concurrently
- Normally, actions and host actions within the same host are allowed to run
concurrently. You can use this property to not allow actions and host actions to run
concurrently.Note: This is a Cleo Harmony and Cleo VLTrader option.
- Buffer Size (kbytes)
- The size of the data blocks (in kbytes) used to transfer the message over each channel.
- Command Retries
- If an error or exception occurs during
a command, the number of times the command should be retried.Note: Command Retries does not apply to exceptions related to TCP/IP or ISDN dial-up connections. This is because dial-up connections are managed by the framework so that they can be shared across actions.
- Connection Timeout
- The amount of time allowed for each read operation.
- Do Not Send Zero Length Files
- Indicates whether zero length files to be sent to the server should be ignored
rather than processed. If the
-DELoption is being used, any zero length file ignored will also be deleted. - Email On Check Conditions Met
- Send an email notification after running a CHECK command where
the overall conditions of the check are met. See Configuring email or execute based on results. Note: This is a Cleo Harmony and Cleo VLTrader option.
- Email On Check Conditions Not Met
- Send an email notification after running a CHECK command where
the overall conditions of the check are not met. See Configuring email or execute based on results. Note: This is a Cleo Harmony and Cleo VLTrader option.
- Email On Fail
- If an error occurs during a command, email the error condition. See Email/Execute Based on Results.
- Email On Flag
- If a flagged event occurs, email the event. See Configuring email or execute based on results.
- Email On Repetitive Action Failures
- When "Email On Fail" is enabled and the same failure occurs each time an action is
run for a specific host, leaving this option unchecked suppresses emailing of the same
alert multiple times. If the same email alert continues to be suppressed after 24 hours,
the suppressed email alert will be sent every 24 hours and after every system restart if
the failure occurs again. When the failure is resolved an email alert will be
sent.Note: This feature only suppresses multiple emails if the same failure occurs multiple times in a row. Suppression is not maintained across synchronized hosts.
- Email On Successful Copy
- Send an email notification after copying a file using LCOPY. See Configuring email or execute based on results.
- Email On Successful Receive
- Send an email notification after successfully receiving a file. See Configuring email or execute based on results.
- Email On Successful Send
- Send an email notification after successfully sending a file. See Configuring email or execute based on results.
- Execute On Check Conditions Met
- After executing a CHECK command where the overall conditions are
met, run a system command. See Configuring email or execute based on results. Note: This is a Cleo Harmony and Cleo VLTrader option.Note: Note that if multiple files contribute to the conditions being met, and one of the file macros is in the command (e.g., %file%), the system command will be executed repeatedly - once for each file.
- Execute On Check Conditions Not Met
- After executing a CHECK command where the overall conditions are
not met, run a system command. See Configuring email or execute based on results. Note: This is a Cleo Harmony and Cleo VLTrader option.
- Execute On Fail
- If an error occurs during a command, run a system command. See Configuring email or execute based on results.
- Execute On Repetitive Action Failures
-
When Execute On Fail is enabled and the same failure occurs each time an action is run for a specific host, leaving this option unchecked suppresses multiple executions of the Execute On Fail command. If suppression of execution of the command for this failure continues after 24 hours, the suppressed Execute On Fail command will be executed every 24 hours and after a system restart if the failure occurs again. When the failure is resolved, the Execute On Fail command will be executed again. Users must account for this by including the %status% macro variable for the Execute On Fail command (see Using macro variables) and then checking for a success or failure.
Note: This feature only suppresses multiple executions of the Execute On Fail command if the same failure occurs multiple times in a row. Suppression is not maintained across synchronized hosts. - Execute On Successful Copy
- After successfully copying a file using LCOPY, run a system command. This command may be used for post-processing the file. See Configuring email or execute based on results.
- Execute On Successful Receive
- After successfully receiving a file, run a system command. This command may be used for post-processing the file. See Configuring email or execute based on results.
- Execute On Successful Send
- After successfully sending a file, run a system command. This command may be used for post-processing the file. See Configuring email or execute based on results.
- Include Failure In Subject Of Email
- When specified, the exception message will be included in the email that is
generated on failure.Note: If the exception message exceeds 256 characters, it will be truncated.
- Integrity Algorithm
- When
NONEis not specified, the content of the message will be hashed using the desired algorithm when sending and will be verified by the HSP using the same algorithm to validate the content has not been changed while in-transit. - LCOPY Archive
- If specified, contains the directory for archiving LCOPY source files.
- Log Individual LCOPY Results To Transfer Logging
- When this option is enabled, a
<send>and<receive>result is logged to the transfer log for each file copied.Note: This is a Cleo Harmony and Cleo VLTrader option. - Macro Date Format
- Specifies the date format to be used when the
%date%macro is used. - Macro Time Format
- Specifies the time format to be used when the
%time%macro is used. - Maximum Incoming Transfer Rate (kbytes/s)
- Sets the maximum incoming transfer rate in Kbytes (1024 bytes) per second for each
mailbox or host. The default value of
0does not limit the transfer rate. The Maximum Incoming Transfer Rate system setting might also limit the transfer rates. The system Maximum Incoming Transfer Rate value is used unless this setting is more restrictive. For simultaneous transfers, the number of active transfers also affects individual transfer rates. See Advanced system options. - Maximum Outgoing Transfer Rate (kbytes/s)
- Sets the maximum outgoing transfer rate in Kbytes (1024 bytes) per second for each
mailbox or host. The default value of
0does not limit the transfer rate. The system setting might also limit the transfer rates. The system Maximum Outgoing Transfer Rate value is used unless this setting is more restrictive. For simultaneous transfers, the number of active transfers will also affect individual transfer rates. See Advanced system options for more information about Maximum Outgoing Transfer Rate. - Minimum Size Per Channel (kbytes)
- Reduces the number of requested channels depending on the overall size of the file. This helps balance the efficiency of the protocol for small files. If the file is smaller than the value you set, a single request is used to transfer the file.
- Outbox Sort
- Controls the order in which multiple files are transferred for a
PUT command. If
System Defaultis specified, the value set on the tab takes precedence. ForAlphabeticalordering, the file extensions are not used to determine the sorted order unless they are needed to make the filenames unique. - Partner Email Address
- The email address of the trading partner for this trading relationship. When set, this address is automatically used to send your local profile information and/or certificates to your trading partner. SeeEmailing a profile to your trading partner.
- Reset Connection After Timeout On Response
- When enabled will cause an immediate reset on the socket (instead of a graceful close) when a SocketTimeoutException occurs.
- Resume Failed Transfers
- When selected and a transfer fails (and Command Retries > 0), attempt to resume
the transfer on a retry. If OpenPGP is enabled on the packaging tab (see Configuring mailbox packaging), the entire file is transferred instead of resuming
with a partial file. The server must support the
FEAT,SIZE, andREST STREAMextensions to FTP. For more information, visit http://tools.ietf.org/html/rfc3659. - Retry Delay
- The amount of time (in seconds) before a retry should be attempted.
- Reuse SSL Sessions Across Actions
- If selected, SSL sessions from previous connections to the same destination (address and port number) may be resumed to avoid costly negotiation. If unselected, only SSL sessions used in the current action to the same destination may be resumed. When unselected, a new SSL session is created for the initial command port connection.
- SSL Allow Legacy Renegotiation
- When selected, legacy renegotiation is allowed. If this property is not selected, the extension described in RFC5746 is used for renegotiation and the server must also support this extension. See RFC5746 for a description of the extension and the vulnerability it addresses.
- SSL Cipher
- Indicates a specific cipher to be used with the server for SSL key exchange, encryption, and hashing. If not set, the list of supported ciphers is presented to the server and the server picks one.
- SSL Maximum Protocol Version
- Specifies the maximum protocol version allowed. By default, this field is blank, designating that Cleo Harmony, Cleo VLTrader, or Cleo LexiCom will select the most recent version (currently TLS 1.2).
- SSL Minimum Encryption Key Size
- Specifies the minimum encryption key size allowed when selecting an SSL cipher. To
prevent use of low- or medium-strength ciphers, change from the default value of
0to112,128, or256(depending on the requirement). Note that if this value is set too high, all ciphers are filtered out causing theNo suitable cipher suites are enabledexception to occur. - SSL Minimum Protocol Version
- Specifies the minimum protocol version allowed. SSL 3.0 is the default value for compatibility with servers that do not support the more recent TLS versions 1.0, 1.1, and 1.2.
- SSL Use Record Splitting
- Indicates whether to use 1/n-1 record splitting in CBC mode as a countermeasure against the Rizzo/Duong BEAST (Browser Exploit Against SSL/TLS) attack against the SSL 3.0 / TLS 1.0 protocol. Must be turned off if the SSL library on the other side of the connection does not support the feature.
- Terminate On Fail
- If an error occurs during a command, stop the action. Note:
Regarding non-CHECK commands: When
Terminate On Failis on, if a command fails,Email On FailandExecute On Fail, if set, are processed, and then the action stops. WhenTerminate On Failis off, if a command fails,Email On FailandExecute On Fail, if set, are processed, and the action continues.Regarding CHECK commands:
Terminate On Failis only honored if theConditionsMetparameter is set and the result of the CHECK is classified asError. The CHECK command is only available in the Cleo Harmony and Cleo VLTrader applications. - Unzip Use Path
- Indicates whether or not zip entry paths should be used for LCOPY -UNZIP operations. When enabled, the entry's path is added to the destination path, unless the entry contains an absolute path. In this case, the absolute path is used in place of the destination path.
- Wait For Execute On
- Indicates whether execution should wait for processing to complete within an Execute On Fail, Execute On Successful Copy, Execute On Successful Receive, or Execute On Successful Send command. Note that this option does not apply to native AS400 execution.
- Zip Comment
- Specifies the comment to be added to the zip archive file in LCOPY -ZIP operations.
- Zip Compression Level
- Controls the level of compression for LCOPY -ZIP operations. If
System Defaultis specified, the value set on the takes precedence - Zip Subdirectories Into Individual Zip Files
- Indicates whether or not subdirectories should be bundled for LCOPY –ZIP
–REC operations. When enabled, each first-level subdirectory (and all of its
descendents) will be bundled together into an individual zip file. The name of this zip
file may optionally reflect the subdirectory name if an asterisk
(
*) is placed in the destination path. Any files that are directly off the source root directory will not be copied.