fasp Host: Advanced Tab
See Setting advanced host properties for information about how to use and set the properties supported in all protocols. Properties available for fasp include:
- Add Mailbox Alias Directory to Inbox
- Appends a subdirectory at the end of the host's configured inbox directory. This allows files received through different mailboxes to be kept separate.
- Add Mailbox Alias Directory to Outbox
- Appends a subdirectory at the end of the host's configured outbox directory. This allows files to be sent through different mailboxes to be kept separate.
- Allow Actions To Run Concurrently
- Normally, actions and host actions within the same host are allowed to run
concurrently. You can use this property to not allow actions and host actions to run
concurrently.Note: This is a Cleo Harmony and Cleo VLTrader option.
- Command Retries
- If an error or exception occurs during
a command, the number of times the command should be retried.Note: Command Retries does not apply to exceptions related to TCP/IP or ISDN dial-up connections. This is because dial-up connections are managed by the framework so that they can be shared across actions.
- Connection Timeout
- The amount of time allowed for each read operation.
- Create Target Path
- Create a target directory if it does not already exist.
- Delete Zero Length Files
- Indicates whether files received that are zero-length (<= 5 bytes) should be deleted rather than processed.
- Do Not Send Zero Length Files
- Indicates whether zero length files to be sent to the server should be ignored
rather than processed. If the
-DELoption is being used, any zero length file ignored will also be deleted. - Email On Check Conditions Met
- Send an email notification after running a CHECK command where
the overall conditions of the check are met. See Configuring email or execute based on results. Note: This is a Cleo Harmony and Cleo VLTrader option.
- Email On Check Conditions Not Met
- Send an email notification after running a CHECK command where
the overall conditions of the check are not met. See Configuring email or execute based on results. Note: This is a Cleo Harmony and Cleo VLTrader option.
- Email On Fail
- If an error occurs during a command, email the error condition. See Email/Execute Based on Results.
- Email On Flag
- If a flagged event occurs, email the event. See Configuring email or execute based on results.
- Email On Repetitive Action Failures
- When "Email On Fail" is enabled and the same failure occurs each time an action is
run for a specific host, leaving this option unchecked suppresses emailing of the same
alert multiple times. If the same email alert continues to be suppressed after 24 hours,
the suppressed email alert will be sent every 24 hours and after every system restart if
the failure occurs again. When the failure is resolved an email alert will be
sent.Note: This feature only suppresses multiple emails if the same failure occurs multiple times in a row. Suppression is not maintained across synchronized hosts.
- Email On Successful Copy
- Send an email notification after copying a file using LCOPY. See Configuring email or execute based on results.
- Email On Successful Receive
- Send an email notification after successfully receiving a file. See Configuring email or execute based on results.
- Email On Successful Send
- Send an email notification after successfully sending a file. See Configuring email or execute based on results.
- Execute On Check Conditions Met
- After executing a CHECK command where the overall conditions are
met, run a system command. See Configuring email or execute based on results. Note: This is a Cleo Harmony and Cleo VLTrader option.Note: Note that if multiple files contribute to the conditions being met, and one of the file macros is in the command (e.g., %file%), the system command will be executed repeatedly - once for each file.
- Execute On Check Conditions Not Met
- After executing a CHECK command where the overall conditions are
not met, run a system command. See Configuring email or execute based on results. Note: This is a Cleo Harmony and Cleo VLTrader option.
- Execute On Fail
- If an error occurs during a command, run a system command. See Configuring email or execute based on results.
- Execute On Repetitive Action Failures
-
When Execute On Fail is enabled and the same failure occurs each time an action is run for a specific host, leaving this option unchecked suppresses multiple executions of the Execute On Fail command. If suppression of execution of the command for this failure continues after 24 hours, the suppressed Execute On Fail command will be executed every 24 hours and after a system restart if the failure occurs again. When the failure is resolved, the Execute On Fail command will be executed again. Users must account for this by including the %status% macro variable for the Execute On Fail command (see Using macro variables) and then checking for a success or failure.
Note: This feature only suppresses multiple executions of the Execute On Fail command if the same failure occurs multiple times in a row. Suppression is not maintained across synchronized hosts. - Execute On Successful Copy
- After successfully copying a file using LCOPY, run a system command. This command may be used for post-processing the file. See Configuring email or execute based on results.
- Execute On Successful Receive
- After successfully receiving a file, run a system command. This command may be used for post-processing the file. See Configuring email or execute based on results.
- Execute On Successful Send
- After successfully sending a file, run a system command. This command may be used for post-processing the file. See Configuring email or execute based on results.
- Include Failure In Subject Of Email
- When specified, the exception message will be included in the email that is
generated on failure.Note: If the exception message exceeds 256 characters, it will be truncated.
- LCOPY Archive
- If specified, contains the directory for archiving LCOPY source files.
- Log Individual LCOPY Results To Transfer Logging
- When this option is enabled, a
<send>and<receive>result is logged to the transfer log for each file copied.Note: This is a Cleo Harmony and Cleo VLTrader option. - Macro Date Format
- Specifies the date format to be used when the
%date%macro is used. - Macro Time Format
- Specifies the time format to be used when the
%time%macro is used. - Minimum Rate (kilobits/s)
- The minimum desired transfer rate in kilobits per second (kbps).
- Only Retrieve First Available File
- Indicates a GET * should only retrieve the first available file from the server.
- Only Retrieve Last Available File
- Indicates a GET * should only retrieve the last available file from the server.
- Outbox Sort
- Controls the order in which multiple files are transferred for a
PUT command. If
System Defaultis specified, the value set on the tab takes precedence. ForAlphabeticalordering, the file extensions are not used to determine the sorted order unless they are needed to make the filenames unique. - Overwrite
- Policy used to overwrite existing files at the destination. See Overwrite and Resume Check properties for more information.
- Partner Email Address
- The email address of the trading partner for this trading relationship. When set, this address is automatically used to send your local profile information and/or certificates to your trading partner. SeeEmailing a profile to your trading partner.
- Policy
- Transfer rate policy with respect to other simultaneous transfers.
- Post Get Command
- Post Put Command
-
In an action, specify commands to be executed only after a successful GET or PUT as post-get or post-put commands, respectively. When using this property, use a SET command within the action before the GET or PUT command rather than the Advanced tab.
The Post Put Command can be set to QUIT, which allows a disconnect and reconnect between file uploads when necessary.
- Pre Get Command
- Pre Put Command
- In an action, specify commands to be executed before a GET or PUT as pre-get or pre-put commands, respectively. This has the benefit of keeping the log results relative to just GETs and PUTs (especially important for Cleo VLTrader and Cleo Harmony GET transfer logging). In addition, for the PUT, it avoids connecting and logging into the server when there are no files to send. When using this property, use a SET command within the action before the GET or PUT command rather than the Advanced tab.
- Pre Put Command For First File Only
- If a Pre Put Command is specified, indicates whether to execute them before each file being transferred by the PUT or only before the first file transfer.
- Preserve Dates
- Preserve file date attributes.
- Resume Check
- Resume policy used for partially transferred files. See Overwrite and Resume Check properties for more information.
- Retry Delay
- The amount of time (in seconds) before a retry should be attempted.
- Target Rate (kilobits/s)
- The target transfer rate in kilobits per second (kbps). A value of zero uses the default Aspera rate, typically 10000.
- Terminate On Fail
- If an error occurs during a command, stop the action. Note:
Regarding non-CHECK commands: When
Terminate On Failis on, if a command fails,Email On FailandExecute On Fail, if set, are processed, and then the action stops. WhenTerminate On Failis off, if a command fails,Email On FailandExecute On Fail, if set, are processed, and the action continues.Regarding CHECK commands:
Terminate On Failis only honored if theConditionsMetparameter is set and the result of the CHECK is classified asError. The CHECK command is only available in the Cleo Harmony and Cleo VLTrader applications. - Transport Encryption
- Specifies the encryption cipher to be used on the UDP transport.
- Unzip Use Path
- Indicates whether or not zip entry paths should be used for LCOPY -UNZIP operations. When enabled, the entry's path is added to the destination path, unless the entry contains an absolute path. In this case, the absolute path is used in place of the destination path.
- Wait For Execute On
- Indicates whether execution should wait for processing to complete within an Execute On Fail, Execute On Successful Copy, Execute On Successful Receive, or Execute On Successful Send command. Note that this option does not apply to native AS400 execution.
- Zip Comment
- Specifies the comment to be added to the zip archive file in LCOPY -ZIP operations.
- Zip Compression Level
- Controls the level of compression for LCOPY -ZIP operations. If
System Defaultis specified, the value set on the takes precedence - Zip Subdirectories Into Individual Zip Files
- Indicates whether or not subdirectories should be bundled for LCOPY –ZIP
–REC operations. When enabled, each first-level subdirectory (and all of its
descendents) will be bundled together into an individual zip file. The name of this zip
file may optionally reflect the subdirectory name if an asterisk
(
*) is placed in the destination path. Any files that are directly off the source root directory will not be copied.